andri-f.blogspot.com
andri's personal blog: July 2014
http://andri-f.blogspot.com/2014_07_01_archive.html
Thursday, July 10, 2014. New Parts for The Engine. July 9, 2014, I disamble my engine, and decided to change some part. The parts is:. I implement Roller Rocker Arm, so it will be less friction. And the result is increasing on the power. The second parts is Piston, as you can see the new piston flat differ than the old one. So, the compression ratio will be increase a little bit. The result is incresing on the power. And here it is when all installed. Subscribe to: Posts (Atom). New Parts for The Engine.
andri-f.blogspot.com
andri's personal blog: April 2010
http://andri-f.blogspot.com/2010_04_01_archive.html
Thursday, April 29, 2010. LED Turn Signal Bulb. Tuesday, April 20, 2010, I received a packages from a friend of mine. He told me that it is a LED turn signal bulb and the winker relay as I requested. I really want to upgrade my turn signal bulb into LED system to save the electricity cost. The stock bulb is 10 Watt a piece, so it will consume 20 Watt (1.67 Amp) if I turn on the light (excluding the winker relay). Here is the calculation on Amber Superflux LED:. Voltage: 2.2 V @ 20 mA. 1 pcs winker relay.
andri-f.blogspot.com
andri's personal blog: May 2010
http://andri-f.blogspot.com/2010_05_01_archive.html
Monday, May 17, 2010. Monday, May 16, 2010, I want to implement a Relay for my scooter horn, so it can produce sound quality on it maximum performance. First thing to do is prepare the tools needed to implementing the relay. 1 pcs 4 leg relay. 1 pcs relay socket. 3 pcs male terminal. 6 pcs female terminal. 2 pcs rubber seal terminal. 1 pcs round terminal. 1 pcs 10A fuse. 1 pcs fuse socket. Cable with 1.5mm diameter cooper width. The fuse that I choose is 10 amp, because the battery in my scooter was 8 amp.
andri-f.blogspot.com
andri's personal blog: January 2010
http://andri-f.blogspot.com/2010_01_01_archive.html
Monday, January 11, 2010. 2009 had passed, it is time to look forward. I know it's kinda late to write this. But it is better late than never, right? Let see, what have I done on the past. Migrate to full DC System. Very little indeed. But I'm pretty satisfied with that project, 'cause I can complete that project with lack of time. So, what next? Hmmm, don't know for sure. Let me think for a while. First, I want to fix my scooter engine. The oil is always running out and unpleasant smell from the exhaust.
andri-f.blogspot.com
andri's personal blog: October 2010
http://andri-f.blogspot.com/2010_10_01_archive.html
Wednesday, October 27, 2010. This morning, Wednesday, October 26, 2010, I ride my scooter with my beloved wife. I ride earlier because I don't wanna get stuck on the morning traffic jam after last night the road get flooded. After I get to the right lane, suddenly a car that is on the left edge of the lane turn the steering wheel to the right and crossing the road very fast. He crashed into my scooter and I fell and he stopped. When I move my scooter, suddenly he went away without leaving a single word.
andri-f.blogspot.com
andri's personal blog: September 2012
http://andri-f.blogspot.com/2012_09_01_archive.html
Monday, September 24, 2012. Short Review: Chemical Guys M-Seal. I bought this product about a month ago, because my sealant is completely run out. So I decide to try this one out. After wash and prep my scooter, I apply a thin layer of this product with a pocket foam applicator pad to the paint surface. It is easy to apply this product, very easy I think. I let the curing time about a hour and buff with a clean microfiber. Subscribe to: Posts (Atom). Short Review: Chemical Guys M-Seal. Job is Like a Game.
andri-f.blogspot.com
andri's personal blog: February 2010
http://andri-f.blogspot.com/2010_02_01_archive.html
Monday, February 08, 2010. Polishing Machine: DA and Rotary. Saturday, February 6, 2010, I decided to buy another new Polishing Machine that is Rotary. This machine is not intended to replace my Dual Action (DA) Porter Cable 7424XP machine, but it will compliment and perfecting the polishing result. Err, may be not. The correct sentence should be: The DA machine will perfecting the end result of the Rotary cutting. I choose DeWalt 849. The difference between DA and Rotary is:. Monday, February 01, 2010.
andri-f.blogspot.com
andri's personal blog: May 2009
http://andri-f.blogspot.com/2009_05_01_archive.html
Friday, May 22, 2009. Thurday, May 21, 2009, at 2:30AM, I want to change the grease on the driven pulley part of my scooter. The grease that I used is not an ordinary grease, because it has to be stand on a very high heat and corrotion. And that is High Temperature Grease. Why should I use the high temp grease? This grease is made from a lithium complex, and that is synthetic grease. Lets begin the work. Here is the picture inside the cvt. Fifth, disassemble the front and rear pulley together. The part t...
andri-f.blogspot.com
andri's personal blog: August 2009
http://andri-f.blogspot.com/2009_08_01_archive.html
Wednesday, August 12, 2009. Migrate to The Full DC System. Friday, August 7, 2009, I want to implement Full Wave electricity system for. The positive effect of Full Wave system is:. Minimal blinking on the light system. And the negative side of Full Wave system is:. More hotter on the rectifier. Must use the Full Wave Rectifier minimum 2 phase (bigger is better). More hotter on the cabling system. This is the step detail to implement Full Wave system (see picture. Release both of the blue mark cable.
andri-f.blogspot.com
andri's personal blog: March 2015
http://andri-f.blogspot.com/2015_03_01_archive.html
Wednesday, March 11, 2015. Plat Dek: Simple, Unik. Aksesoris original Suzuki Address lainnya yang menarik perhatian saya adalah plat dek/bordes. Design dari plat ini cukup unik, karena ide, bentuk dan penempatannya yang dirancang sangat teliti. Brilian! Plat ini diposisikan mengisi gap di dalam cekungan yang ada pada dek. Sehingga tidak akan terinjak oleh alas kaki. Jadi keindahannya pun akan tetap terjaga, karena resiko kerusakan akibat tekanan benda pada bagian atasnya sangat minim. A hole in the Box.