brimotech.nl
Life cycle
http://www.brimotech.nl/en/technical-information/life-cycle
Sunday, 21 August 2016. The life cycle of a gas spring is mainly tied to the normal wear of the seals. Endurance tests have shown that, in optimal conditions, Vapsint gas springs fully reach 100,000 opening and closing cycles. This value, however, is affected by the use the spring may be put to. To give designers and manufacturers a guide to make the best of this product, please visit Tips. Section on this site.
brimotech.nl
Releases
http://www.brimotech.nl/en/products/releases
Sunday, 21 August 2016. For our lockable gas springs we offer a wide range of release mechanisms. These are our standard releases on stock. Next to these releases we supply all systems from the large known European producers. Please This email address is being protected from spambots. You need JavaScript enabled to view it. Us for any requests.
brimotech.nl
Products
http://www.brimotech.nl/en/products
Sunday, 21 August 2016. Since march 1st 2012 Brimotech became the exclusive partner of Vapsint s.r.l for the Benelux, Germany, Sweden and Denmark. Vapsint is one of the most innovative producers of gas springs, dampers and automotive parts in Europe. "Extend your ideas" is the appropriate term for Vapsint and Brimotech. Together we have 70 years of experience within the gas springs and damper market. Why our customers choose the products from Vapsint/Brimotech? We love to do more for our customers.
brimotech.nl
Downloads
http://www.brimotech.nl/en/downloads
Sunday, 21 August 2016. Here you can find our complete overview for all catalogues for PDF downloading. To view our PDF catalogues Adobe reader is needed. To download and install Adobe. Gas springs and Dampers. End fittings complete overview. Black box carbon steel gas springs. Black box Stainless316 gas springs. Black box lockable gas springs.
brimotech.nl
How it works
http://www.brimotech.nl/en/technical-information/how-it-works
Sunday, 21 August 2016. A gas spring consists of a steel cylinder containing gas under pressure and a rod which slides in and out of the cylinder through a sealed guide. When the gas is compressed by the retraction of the rod, it produces a thrust in return, acting like a spring. How gas springs work. The thrust of the spring is measured with a special dynamometer at a room temperature of approx. 20 °C with the rod compressed by about 10 mm and free from friction by the seal. The resistance exerted by su...
brimotech.nl
Tips
http://www.brimotech.nl/en/technical-information/tips
Sunday, 21 August 2016. Always make sure for the correct installation of the gas springs. That means in general with the cilinder pointing upwards. Most difficult is the situation below. Whenever you have a situation like this we recommend our dynamic damping. Here are some tips for the best working and longest life. Vibrations on the machine to which the gas spring is applied may be discharged onto the seals through attachments that are connected too rigidly to the frame. Leave a small clearance bet...
brimotech.nl
Temperature
http://www.brimotech.nl/en/technical-information/temperature
Sunday, 21 August 2016. Temperature influences the thrust of gas springs. It makes the nitrogen in the cilinder expand or contract and, since the variation occurs at constant volume, this causes the internal pressure to increase or decrease. The gas spring thrust varies by 3,4% every 10ºC difference. Our gas springs can be used within -30ºC up to 80ºC. On request other solutions are available.
brimotech.nl
Calculation
http://www.brimotech.nl/en/technical-information/calculation
Sunday, 21 August 2016. NB: In the various applications, distance (L) is identified as perpendicular between the axis of the gas spring and the parallel, with respect to the spring, that passes through the Fulcrum (O). On the right the relative simple situation and calculation:. F1 = {[(M x D) : L] : n } (10% 15%). M= Weight in N of the item to lift, designed as the vector. B = Application point of the Weight of the item being lifted and which corresponds to the Barycentre. N= Quantity of gas springs.
brimotech.nl
Automotive
http://www.brimotech.nl/en/products/automotive
Sunday, 21 August 2016. The Vapsint experience in the automotive industry results in a wide range of spare parts for the automotive industry. All products are available on request. Soon all further details and specs will be added.